4-Channel Amplifier

The main thing in a 4 channel amp puts out equal power in four separate channels. At its most basic, a 4 channel amp can be easily used to power two pairs of full-range speakers.

4 channel amp starts to show their versatility when they are bridged. This involves combining the power from two of the channels into a single channel. Many 4 channel amplifier is bridgeable to three or even in two-channel amplifiers. In a 3-channel configuration, you can send power for a subwoofer from the bridged channels and two channels remaining to power a pair of speakers. it is bridged down to two channels, the amp will provide power to two subwoofers, or a single dual-voice-coil subwoofer.

Why do you want one? The difference even a small amplifier makes compared to what is often referred to as “deck power” from a factory radio can be amazing, especially when you upgrade from your OEM speakers. An un-bridged 4 channel amplifier gives you a great deal of control over the balance and fade of your speakers. The 4 channel amp also provides more punch for the mid-bass sound. Bridging often produces more power than the simple sum of the two channels for a woofer.

Here’s a word about bridging: it can be tricky. Not all amplifiers are built to be bridged, and not all bridgeable amps go about it exactly the same way. When you bridge an amplifier you change the impedance of the amplifier. There is a danger of damaging the amp, speakers or both. Check the owner’s manual before you start, and if it still looks puzzling, get expert help.

5-Channel Amplifier

5-Channel amplifiers are designed for complete system amplification. These amps have 4 channels dedicated to speakers and a single channel dedicated to a subwoofer. These 5 channel amplifiers make amplifying an entire vehicle easy and with the installation of only a single amplifier which is quite easy and you can get a 5 channel amplifier at an affordable price nowadays. You can buy it online or offline.

If you have four door speakers and a sub, there’s quite a good chance that you’ll need two amps (maybe a 4-channel and a 1-channel) to drive the system to its optimum performance. Before the introduction of 5 channel amps, car audio lovers would install two amps in the past days to enjoy better music in their cars. Today, 5 channel amps are used to provide the benefits that come with using multiple amps. They save on space, time, and money. The 5 channel amp also has some attractive features like Bridgeable, tri-mode operation, fills your car with loads of punch, Simple connection and tuning, massive power output, Easy to use controls, highly versatile to suit a wide range of systems. The new generation amplifiers are also can be provided with Advanced Rollback Protection (ARP), Ultra-high energy efficiency, Remote bass level control, Weather-resistant by which music is on the go, Great sound amplification that gives clean, non-distorted sound, best gauge wire.


Getting an ideal amplifier for your favorite car and how do you mount it both are a very tough job because we have a variety of amplifiers which can make a drive smooth. Nowadays, the biggest challenge is choosing between a 4-channel and 5- channel amplifier. Both have their own pros and cons like a 4-channel amp is bridgable where a 5-channel amp cannot do that. It also varies with 4-door and a 2-door car, if you have a family four-door car then you must go with a 5-channel amp because it will provide enough amplification to all of your speakers and subwoofer. where if you have 2 door car then you must go with a 4 channel amplifier. With a 4 channel amplifier, you can bridge it to the other subwoofer and can have the best bass you want.

About the author

Kristina Adams

Kristina Adams

Leave a Comment